Introduction

This step-by-step guide illustrates how to remove and replace the back case of a Pocket PC.

Pièces

Aucune pièce nécessaire.

  1. Slide the silver release tab up and simultaneously lift the cover up from the left side.
    • Slide the silver release tab up and simultaneously lift the cover up from the left side.

  2. Push the tab from left to right to remove the cover.
    • Push the tab from left to right to remove the cover.

    • Now lift the battery up and away from the device to remove it.

    • Remove the four silver screws (T5 x .25 in).

    • Remove the single black screw (T5 x .125 in) beneath the HP sticker.

    • Next, use your plastic removal tool to separate the gray back from the black center piece.

    • For better results, start the separation at the corner piece.

    • Remove the back case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

John Pagliero

Membre depuis le 27/01/2011

886 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 3-39, Regan Winter 2011 Membre de l'équipe Cal Poly, Team 3-39, Regan Winter 2011

CPSU-REGAN-W11S3G39

4 membres

7 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 680