Réparez vos affaires

Droit à la réparation

Boutique

HP iPAQ h4155 Motherboard Replacement

Rédigé par : John Pagliero (et 5 autres contributeurs)
  • Commentaires : 0
  • Favoris : 1
  • Réparations terminées : 1

Difficulté

Modérée

Étapes

14

Temps nécessaire

15 - 30 minutes

Sections

4

Drapeaux

3

Action Shots

Photos d’action

Montrez ce dont un héros est capable ! Ce tutoriel a besoin d'images pour mieux illustrer certaines opérations spécifiques.

Grammar Police

Police de grammaire

Réveillez le prof qui sommeille en vous et aidez-nous à améliorer l'orthographe de ce tutoriel !

Incorrect Tools

Outils incorrects

Participez à l'amélioration de ce tutoriel en utilisant les outils adaptés dans les photos et/ou le texte.

  1. Slide the silver release tab up and simultaneously lift the cover up from the left side.

    • Slide the silver release tab up and simultaneously lift the cover up from the left side.

    Modifier

  2. Push the tab from left to right to remove the cover.

    • Push the tab from left to right to remove the cover.

    Modifier

  3. Now lift the battery up and away from the device to remove it.

    • Now lift the battery up and away from the device to remove it.

    Modifier

  4. Remove the four silver screws (T5 x .25 in).

    • Remove the four silver screws (T5 x .25 in).

    Modifier

  5. Remove the single black screw (T5 x .125 in) beneath the HP sticker.

    • Remove the single black screw (T5 x .125 in) beneath the HP sticker.

    Modifier

  6. Le kit d'outils Essentiel

    Les outils les plus utiles dans notre kit le plus compact.

    J'achète

    Le kit d'outils Essentiel

    Les outils les plus utiles dans notre kit le plus compact.

    J'achète

  7. Next, use your plastic removal tool to separate the gray back from the black center piece. For better results, start the separation at the corner piece.

    • Next, use your plastic removal tool to separate the gray back from the black center piece.

    • For better results, start the separation at the corner piece.

    Modifier

  8. Remove the back case.

    • Remove the back case.

    Modifier

  9. Now that the back cover is removed, remove the small screw (#00 Philips x .17) to the left of the SD card slot

    • Now that the back cover is removed, remove the small screw (#00 Philips x .17) to the left of the SD card slot

    Modifier

  10. Next you will need to unlock and remove the ribbon cable Carefully pull back on both sides of the brown bar using metal tweezers, unlocking the cable and slipping it out of the connector

    • Next you will need to unlock and remove the ribbon cable

    • Carefully pull back on both sides of the brown bar using metal tweezers, unlocking the cable and slipping it out of the connector

    • The bar, connector, and cable are fragile components that can be easily broken

    Modifier

  11. Next you need to remove the wire off the bottom of the mother board The easiest method is to use some metal tweezers and grip the plug close to the connector.

    • Next you need to remove the wire off the bottom of the mother board

    • The easiest method is to use some metal tweezers and grip the plug close to the connector.

    • Make sure all these connections are properly disconnected before separation of the motherboard

    Modifier

  12. Next use your plastic removal tool and separate the silver front case from the black frame.

    • Next use your plastic removal tool and separate the silver front case from the black frame.

    Modifier

  13. Now that the front cover is removed we will need to disconnect the LCD screen from the mother board. Pull the LCD connection out of the slot to properly disconnect.

    • Now that the front cover is removed we will need to disconnect the LCD screen from the mother board. Pull the LCD connection out of the slot to properly disconnect.

    Modifier

  14. Next we will need to remove the last wire from the motherboard

    • Next we will need to remove the last wire from the motherboard

    • The easiest method is to grab and pull with metal tweezers near the bottom of the plug near the connector.

    Modifier

  15. Finally the mother board can be removed from the center black frame. Finally the mother board can be removed from the center black frame.

    • Finally the mother board can be removed from the center black frame.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 5 autres contributeurs

John Pagliero

Membre depuis le 27/01/2011

927 Réputation

7 tutoriels rédigés

Badges: 14

+ 11 badges supplémentaires

0 commentaires

Ajouter un commentaire

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 909