Pièces

Aucune pièce nécessaire.

Slide the silver release tab up and simultaneously lift the cover up from the left side.
  • Slide the silver release tab up and simultaneously lift the cover up from the left side.

Ajouter un commentaire

Push the tab from left to right to remove the cover.
  • Push the tab from left to right to remove the cover.

Ajouter un commentaire

  • Now lift the battery up and away from the device to remove it.

Ajouter un commentaire

  • Remove the four silver screws (T5 x .25 in).

Ajouter un commentaire

  • Remove the single black screw (T5 x .125 in) beneath the HP sticker.

Ajouter un commentaire

  • Next, use your plastic removal tool to separate the gray back from the black center piece.

  • For better results, start the separation at the corner piece.

Ajouter un commentaire

  • Remove the back case.

Ajouter un commentaire

  • Now that the back cover is removed, remove the small screw (#00 Philips x .17) to the left of the SD card slot

Ajouter un commentaire

  • Next you will need to unlock and remove the ribbon cable

  • Carefully pull back on both sides of the brown bar using metal tweezers, unlocking the cable and slipping it out of the connector

  • The bar, connector, and cable are fragile components that can be easily broken

Ajouter un commentaire

  • Next you need to remove the wire off the bottom of the mother board

  • The easiest method is to use some metal tweezers and grip the plug close to the connector.

  • Make sure all these connections are properly disconnected before separation of the motherboard

Ajouter un commentaire

  • Next use your plastic removal tool and separate the silver front case from the black frame.

Ajouter un commentaire

  • Remove the 4 screws along the bottom of the faceplate

  • They are #00 Philips head screws

Ajouter un commentaire

  • Once removed you can easily separate the keys from the body.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

John Pagliero

Membre depuis le 27/01/2011

886 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 3-39, Regan Winter 2011 Membre de l'équipe Cal Poly, Team 3-39, Regan Winter 2011

CPSU-REGAN-W11S3G39

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 306