Aller au contenu principal

Introduction

Is your monitor not powering on? Is the power button making a weird clicking noise? You might need to replace the power button.

Pièces

Aucune pièce spécifiée.

  1. Do not put the metal spudger between the metal and the glass. It needs to go under the bezel and above the metal. Turn monitor so that the screen is facing you. Pry the black bezel from above the metal by placing your metal spudger between the bezel and the metal and twisting the tool slightly.
    • Do not put the metal spudger between the metal and the glass. It needs to go under the bezel and above the metal.

    • Turn monitor so that the screen is facing you.

    • Pry the black bezel from above the metal by placing your metal spudger between the bezel and the metal and twisting the tool slightly.

    • The best places to pry are in the lower left and lower right corners of the black bezel.

  2. Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant
  3. Do not pull the screen away to hard, this could snap the power cable.
    • Do not pull the screen away to hard, this could snap the power cable.

    • Remove the power button from the top of the plastic frame.

  4. Remove the power cable by carefully sliding it out of it's plug.
    • Remove the power cable by carefully sliding it out of it's plug.

    • Check if there is any tear or fray in the cable.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sadeq Taha

Membre depuis le 25/03/2016

183 Réputation

1 tutoriel rédigé

Équipe

UMass Dartmouth, Team 1-1, Miles Spring 2016 Membre de l'équipe UMass Dartmouth, Team 1-1, Miles Spring 2016

UMASSD-MILES-S16S1G1

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 189