HP-Pavillion 500-424 PC Series CPU Fan Replacement

Introduction

If the CPU fan becomes to filled with dust or stops spinning, it must be replaced immediately. If it is not replaced then the CPU or motherboard can become damaged and cause the computer to be unbootable

Ce dont vous avez besoin

Étape 1 Central Processor Fan

HP-Pavillion 500-424 PC Series CPU Fan Replacement, Central Processor Fan: étape 1, image 1 de 2

HP-Pavillion 500-424 PC Series CPU Fan Replacement, Central Processor Fan: étape 1, image 2 de 2

Lay the tower down carefully on its right side, with the vents pointing up.

Modifier

Étape 2

HP-Pavillion 500-424 PC Series CPU Fan Replacement: étape 2, image 3 de 3

Use the flat head #6 screwdriver bit to unscrew the tower casing.
Very gently slide the case towards you.
Lift the casing up and gently place it off to the side.

Modifier

Étape 3

HP-Pavillion 500-424 PC Series CPU Fan Replacement: étape 3, image 3 de 3

Unplug the fan from the motherboard by gently grasping the connector and slowing pulling up.
Remove each screw from the fan using the Phillips head screwdriver bit.
Place the screws in a cup, they are very small and can be lost easily.
Remove the old fan from the CPU.

Modifier

Conclusion

To reassemble your device, follow these instructions in reverse order. Now you should feel confident replacing the CPU fan in your HP desktop without any difficulties.

2 autres ont terminé cette réparation.