Aller au contenu principal

Introduction

This guide describes how to replace the Battery on an HTC Evo 3D. This guide may be necessary for batteries that do not hold a charge, die quickly, get very hot, form buldges, and more. This replacement may be completed without the need for any special tools. All you will need is a working HTC Evo 3D and the proper replacement battery.

  1. Remove the battery cover by carefully lifting the battery cover from the bottom of the phone.
    • Remove the battery cover by carefully lifting the battery cover from the bottom of the phone.

    • Do not apply excessive pressure when removing cover, as this may damage or break the cover/clip.

  2. Remove the battery by pulling up on the lower indenture in the battery compartment. Remove the battery by pulling up on the lower indenture in the battery compartment.
    • Remove the battery by pulling up on the lower indenture in the battery compartment.

  3. When insert the new battery, be sure to align the golden contacts on the top part of the battery compartment with the replacement battery. When insert the new battery, be sure to align the golden contacts on the top part of the battery compartment with the replacement battery.
    • When insert the new battery, be sure to align the golden contacts on the top part of the battery compartment with the replacement battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Matthew Pope

Membre depuis le 26/08/2015

441 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team 14-20, Meier Fall 2015 Membre de l'équipe USF Tampa, Team 14-20, Meier Fall 2015

USFT-MEIER-F15S14G20

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 444