Aller au contenu principal

HTC Hero Motherboard Replacement

Ce dont vous avez besoin

  1. HTC Hero Motherboard Replacement, Back Case: étape 1, image 1 de 1
    • Remove the back of the phone by pushing firmly with your thumbs up towards the camera.

    • Remove both the battery and the SD card (Press SD card in to release)

    • Locate and remove the four Torx screws highlighted in the photo, with the phone laying face down on your work space.

  2. HTC Hero Motherboard Replacement: étape 2, image 1 de 1
    • Carefully pry the inside back cover from the device using an appropriate size plastic opening tool or small flathead screwdriver.

    • Insert the flat end between the back and front enclosure, working your way around the rim.

  3. HTC Hero Motherboard Replacement: étape 3, image 1 de 1
    • Gently depress and release the small plastic tabs around the rim in the front enclosure, highlighted here.

    • It is best to start with the tab found on the top center of the phone, as it is easiest to locate.

  4. HTC Hero Motherboard Replacement: étape 4, image 1 de 2 HTC Hero Motherboard Replacement: étape 4, image 2 de 2
    • Carefully separate the front and back enclosures once all of the clips have been disengaged.

    • Be sure to not separate too quickly or you risk breaking an attached tab.

  5. HTC Hero Motherboard Replacement, Motherboard: étape 5, image 1 de 2 HTC Hero Motherboard Replacement, Motherboard: étape 5, image 2 de 2
    • Release the two ribbon cables using a plastic opening tool.

    • Gently pry up the pop connectors used to attach the ribbon cables to the motherboard.

  6. HTC Hero Motherboard Replacement: étape 6, image 1 de 2 HTC Hero Motherboard Replacement: étape 6, image 2 de 2
    • Remove the two screws located at the bottom left and right of the motherboard using a small Phillips screwdriver.

  7. HTC Hero Motherboard Replacement: étape 7, image 1 de 2 HTC Hero Motherboard Replacement: étape 7, image 2 de 2
    • Gently lift the motherboard out of the front enclosure once the screws are removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Rosalind Villalvazo

Membre depuis le 01/23/12

100 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 3-26, Amido Winter 2012 Membre de l'équipe Cal Poly, Team 3-26, Amido Winter 2012

CPSU-AMIDO-W12S3G26

5 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,549