Réparez vos affaires Communauté Boutique

HTC Hero Trackball Replacement

Ce dont vous avez besoin

  1. HTC Hero Trackball Replacement, Back Case: étape 1, image 1 de 1

    • Remove the back of the phone by pushing firmly with your thumbs up towards the camera.

    • Remove both the battery and the SD card (Press SD card in to release)

    • Locate and remove the four Torx screws highlighted in the photo, with the phone laying face down on your work space.

    Traduire

  2. HTC Hero Trackball Replacement: étape 2, image 1 de 1

    • Carefully pry the inside back cover from the device using an appropriate size plastic opening tool or small flathead screwdriver.

    • Insert the flat end between the back and front enclosure, working your way around the rim.

    Traduire

  3. HTC Hero Trackball Replacement: étape 3, image 1 de 1

    • Gently depress and release the small plastic tabs around the rim in the front enclosure, highlighted here.

    • It is best to start with the tab found on the top center of the phone, as it is easiest to locate.

    Traduire

  5. HTC Hero Trackball Replacement: étape 4, image 1 de 2 HTC Hero Trackball Replacement: étape 4, image 2 de 2

    • Carefully separate the front and back enclosures once all of the clips have been disengaged.

    • Be sure to not separate too quickly or you risk breaking an attached tab.

    Traduire

  6. HTC Hero Trackball Replacement, Trackball: étape 5, image 1 de 2 HTC Hero Trackball Replacement, Trackball: étape 5, image 2 de 2

    • Remove the two screws near the bottom of the motherboard with a Phillips head screwdriver.

    Traduire

  7. HTC Hero Trackball Replacement: étape 6, image 1 de 2 HTC Hero Trackball Replacement: étape 6, image 2 de 2

    • Gently pull off the ribbons holding the sides of the motherboard to the front enclosure.

    Traduire

  8. HTC Hero Trackball Replacement: étape 7, image 1 de 2 HTC Hero Trackball Replacement: étape 7, image 2 de 2

    • Remove the motherboard from within the front enclosure.

    • Be careful when pulling the ribbons off the motherboard as they may rip or break.

    Traduire

  9. HTC Hero Trackball Replacement: étape 8, image 1 de 2 HTC Hero Trackball Replacement: étape 8, image 2 de 2

    • Tilt the inside of the front enclosure towards your cupped palm to remove the trackball and it's enclosure will fall out.

    Traduire

  10. HTC Hero Trackball Replacement: étape 9, image 1 de 3 HTC Hero Trackball Replacement: étape 9, image 2 de 3 HTC Hero Trackball Replacement: étape 9, image 3 de 3

    • Position the phone off of the edge of the table and insert the replacement part by inserting the bevel then the trackball into the hole.

    • Make sure the two plastic pins on the trackball bevel are oriented horizontally.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 4 autres contributeurs

Max Brown

Membre depuis le 01/23/12

139 Réputation

4 tutoriels rédigés

Badges: 7

+ 4 badges supplémentaires

Équipe

Cal Poly, Team 3-26, Amido Winter 2012 Membre de l'équipe Cal Poly, Team 3-26, Amido Winter 2012

CPSU-AMIDO-W12S3G26

5 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,510