Aller au contenu principal

Fix Your Stuff

Right to Repair

Parts & Tools

Introduction

Remove 4 Torx screws and 2 #00 Philps

  1. First remove the back cover of your phone to expose the battery.
    • First remove the back cover of your phone to expose the battery.

  2. Turn the phone over.
    • Turn the phone over.

    • Push forward on the battery with your thumb.

  3. Take the battery out by lifting it upwards. When reassembling, make sure that the battery contacts match up.
    • Take the battery out by lifting it upwards.

    • When reassembling, make sure that the battery contacts match up.

  4. Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone. Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone.
    • Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone.

  5. Remove the two 4.3mm Phillips #00 screws that secure the back panel to the rest of the phone.
    • Remove the two 4.3mm Phillips #00 screws that secure the back panel to the rest of the phone.

  6. Insert the plastic opening tool along the seams at different points to it pry the clips off. This may require a bit of force. The USB port cover may fall off in this step. This may require a bit of force. The USB port cover may fall off in this step.
    • Insert the plastic opening tool along the seams at different points to it pry the clips off.

    • This may require a bit of force. The USB port cover may fall off in this step.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew Van Meter

Membre depuis le 06/10/2011

24 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 20-29, Maness Fall 2011 Membre de l'équipe Cal Poly, Team 20-29, Maness Fall 2011

CPSU-MANESS-F11S20G29

4 membres

9 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 716