Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

Use this guide to replace the rear case on your HTC One M8.

  1. Insert a SIM card eject tool or a paperclip into the small hole in the SIM card tray, located on the upper left hand side of the phone. Press to eject the tray.
    • Insert a SIM card eject tool or a paperclip into the small hole in the SIM card tray, located on the upper left hand side of the phone.

    • Press to eject the tray.

    • This may require a significant amount of force.

  2. Remove the SIM card tray assembly from the HTC One M8.
    • Remove the SIM card tray assembly from the HTC One M8.

    • When reinserting the SIM card, ensure that it is in the proper orientation relative to the tray.

  3. Insert a SIM card eject tool or a paperclip into the small hole in the microSD card tray, located on the upper right hand side of the phone. Press to eject the tray.
    • Insert a SIM card eject tool or a paperclip into the small hole in the microSD card tray, located on the upper right hand side of the phone.

    • Press to eject the tray.

    • This may require a significant amount of force.

  4. Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch

    Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch
  5. Remove the microSD card tray assembly from the HTC One M8.
    • Remove the microSD card tray assembly from the HTC One M8.

    • When reinserting the microSD card, ensure that it is in the proper orientation relative to the tray.

  6. Use an iOpener or heat gun to loosen the adhesive on the upper and lower speaker grilles. Refer to the iOpener guide for info on how to use the iOpener.
    • Use an iOpener or heat gun to loosen the adhesive on the upper and lower speaker grilles.

    • Refer to the iOpener guide for info on how to use the iOpener.

  7. Use a plastic opening tool to gently peel up the lower speaker grille. The adhesive is messy, and can be removed using Goo-gone. The adhesive is messy, and can be removed using Goo-gone.
    • Use a plastic opening tool to gently peel up the lower speaker grille.

    • The adhesive is messy, and can be removed using Goo-gone.

  8. Use a plastic opening tool to gently peel up the upper speaker grille. Use a plastic opening tool to gently peel up the upper speaker grille.
    • Use a plastic opening tool to gently peel up the upper speaker grille.

  9. Remove the two silver 3 mm Phillips #00 screws from the top.
    • Remove the two silver 3 mm Phillips #00 screws from the top.

    • Remove the four black 4 mm T5 Torx screws from the bottom.

  10. Work your way around the perimeter of the phone with a spudger and plastic opening picks to free the clips that secure the rear case to the display assembly. A metal spudger is pictured, but it is best to use a nylon spudger to prevent marring the device. Be careful not to lose the power button: it sits loosely in the top of the lower chassis.
    • Work your way around the perimeter of the phone with a spudger and plastic opening picks to free the clips that secure the rear case to the display assembly.

    • A metal spudger is pictured, but it is best to use a nylon spudger to prevent marring the device.

    • Be careful not to lose the power button: it sits loosely in the top of the lower chassis.

    • Significant force may be required to pry the casing apart.

Conclusion

To reassemble your device, follow these instructions in reverse order.

12 autre(s) ont terminé cette réparation.

Michael Gonzalez

Membre depuis le 14/04/2015

4 154 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 5-9, Maness Spring 2015 Membre de l'équipe Cal Poly, Team 5-9, Maness Spring 2015

CPSU-MANESS-S15S5G9

4 membres

18 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 6

30 derniers jours : 36

Total : 6,150