Réparez vos affaires Communauté Boutique

HTC Thunderbolt Rear Frame Replacement

Ce dont vous avez besoin

  1. HTC Thunderbolt Rear Frame Replacement, Rear Panel: étape 1, image 1 de 1

    • Insert the plastic opening tool into the top of the Thunderbolt near the power button.

    • Gently pry up on the rear panel around the edges until it is loose.

    Traduire

  2. HTC Thunderbolt Rear Frame Replacement: étape 2, image 1 de 1

    • Lift and remove the rear panel.

    Traduire

  3. HTC Thunderbolt Rear Frame Replacement, Battery: étape 3, image 1 de 2 HTC Thunderbolt Rear Frame Replacement, Battery: étape 3, image 2 de 2

    • Using the plastic opening tool, lift up the battery from the bottom near the kickstand.

    • Remove the battery from the inner frame.

    Traduire

  4. HTC Thunderbolt Rear Frame Replacement, MicroSD Card: étape 4, image 1 de 2 HTC Thunderbolt Rear Frame Replacement, MicroSD Card: étape 4, image 2 de 2

    • Use your finger to push the MicroSD card in towards the top of the phone, allowing it to be released from the casing.

    Traduire

  6. HTC Thunderbolt Rear Frame Replacement: étape 5, image 1 de 1

    • Use tweezers to grab onto the MicroSD card and carefully remove it from the casing.

    Traduire

  7. HTC Thunderbolt Rear Frame Replacement, Rear Frame: étape 6, image 1 de 1

    • Remove the six Phillips screws from the perimeter of the rear frame.

    • By removing the screw with the "void" sticker on it, your Thunderbolt will no longer be covered under warranty.

    Traduire

  8. HTC Thunderbolt Rear Frame Replacement: étape 7, image 1 de 2 HTC Thunderbolt Rear Frame Replacement: étape 7, image 2 de 2

    • Insert the plastic opening tool into the bottom of the phone underneath the soft keys.

    • Gently pry up on the plastic cover by sliding the plastic opening tool across the bottom of the phone.

    • Remove the plastic cover.

    • The plastic cover will have adhesive on it making it difficult to remove.

    Traduire

  9. HTC Thunderbolt Rear Frame Replacement: étape 8, image 1 de 1

    • Remove the two Phillips screws where the plastic cover was.

    Traduire

  10. HTC Thunderbolt Rear Frame Replacement: étape 9, image 1 de 2 HTC Thunderbolt Rear Frame Replacement: étape 9, image 2 de 2

    • Insert the plastic opening tool in between the screen and the frame on the side of the phone.

    • Slowly slide the the plastic opening tool along the side of the phone until the screen begins to separate from the frame.

    • Do the same for the opposite side of the phone.

    Traduire

  11. HTC Thunderbolt Rear Frame Replacement: étape 10, image 1 de 3 HTC Thunderbolt Rear Frame Replacement: étape 10, image 2 de 3 HTC Thunderbolt Rear Frame Replacement: étape 10, image 3 de 3

    • Carefully separate the screen and phone from the rear frame, starting from the bottom.

    • Gently pull down on the phone and screen to fully separate it from the rear frame.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 5 autres contributeurs

Brandon Younger

Membre depuis le 01/17/13

212 Réputation

8 tutoriels rédigés

Badges: 13

+ 10 badges supplémentaires

Équipe

Cal Poly, Team 19-45, Regan Winter 2013 Membre de l'équipe Cal Poly, Team 19-45, Regan Winter 2013

CPSU-REGAN-W13S19G45

4 membres

24 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 471