Pièces

Aucune pièce nécessaire.

  1. Remove the back cover by applying pressure and sliding upward.
    • Remove the back cover by applying pressure and sliding upward.

    • Lift the back cover up and away from the phone.

    Ajouter un commentaire

  2. Remove the battery by lifting upward from the slot located on the right hand side.
    • Remove the battery by lifting upward from the slot located on the right hand side.

    Ajouter un commentaire

  3. Livraison gratuite pour les commandes de plus de 20 $
    Indiquez le code BLUEANDBLACK au moment de payer
    Livraison gratuite pour les commandes de plus de 20 $
    Indiquez le code BLUEANDBLACK
    • Using a T5 screwdriver, remove the four screws in corners as shown.

    • Lift the top portion of the rear case.

      • There is a ribbon attached on the back of this part that requires caution to remove.

    Ajouter un commentaire

    • Using a plastic opening tool, detach the plastic casing from keyboard. This may require some force.

    • Using a spudger or other thin tool, carefully pry up ZIF connectors as shown. This will allow the black ribbons to detach from the keyboard.

    • Slide the two parts away from each other so that the black ribbons slide through the slots and you will now have housing into two parts.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Melinda Phan

Membre depuis le 17/04/2011

435 Réputation

9 tutoriels rédigés

Équipe

Cal Poly, Team 9-64, Walters Spring 2011 Membre de l'équipe Cal Poly, Team 9-64, Walters Spring 2011

CPSU-WALTERS-S11S9G64

5 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 3,669