Pièces

Aucune pièce nécessaire.

  1. Identify the black air concentrating nozzle.
    • Identify the black air concentrating nozzle.

    Ajouter un commentaire

  2. Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.
    • Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

    Ajouter un commentaire

    • Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

    • The purpose of this guide is to demonstrate the repair steps for a generic hair dryer. We do not specify screw sizes because screw sizes can differ between hair dryers. For most hair dryers, use a Phillips #1 Screwdriver. For hair dryers with smaller screws, consider using a Phillips #00 Screwdriver.

    Ajouter un commentaire

    • Detach the hair dryer grating from the body by gently twisting the grating from side to side.

    Ajouter un commentaire

    • Separate the hair dryer grating into the three pieces seen in the image.

    Ajouter un commentaire

    • Using a Phillips #1 Screwdriver, remove the screws located on the hair dryer handle.

    Ajouter un commentaire

    • Using a plastic opening tool, carefully remove the front face of the hair dryer plastic case.

    Ajouter un commentaire

    • The hair dryer is now disassembled. The fan, motor, heating element cover, and internal wiring are exposed.

      • Identify the turbo button.

      • Identify the button switchboard.

    Ajouter un commentaire

    • Gently pull the turbo button away from the hair dryer body.

      • If the turbo setting is still not working after you replace the switchboard, consider using soldering techniques to replace the turbo button .

    Ajouter un commentaire

    • Gently pull the button switchboard away from the hair dryer body.

    • Using a desoldering wick and a soldering iron, desolder the wires.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mitch

Membre depuis le 04/10/2012

28 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 24-29, Regan Fall 2012 Membre de l'équipe Cal Poly, Team 24-29, Regan Fall 2012

CPSU-REGAN-F12S24G29

5 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 15

30 derniers jours : 91

Total : 4,300