Réparez vos affaires Communauté Boutique

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Hair Dryer Button Switchboard Replacement

Ce dont vous avez besoin

  1. Hair Dryer Button Switchboard Replacement, Nozzle: étape 1, image 1 de 2 Hair Dryer Button Switchboard Replacement, Nozzle: étape 1, image 2 de 2

    • Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

    • If nozzle is not attached, skip to next step.

    Traduire

  2. Hair Dryer Button Switchboard Replacement, Grating: étape 2, image 1 de 1

    • Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

    • For most hair dryers, use a Phillips #1 screwdriver. For hair dryers with smaller screws, consider using a Phillips #00 screwdriver.

    Traduire

  3. Hair Dryer Button Switchboard Replacement: étape 3, image 1 de 1

    • Detach the hair dryer grating from the body by gently twisting the grating from side to side.

    Traduire

  5. Hair Dryer Button Switchboard Replacement: étape 4, image 1 de 1

    • Separate the hair dryer grating into the three pieces seen in the image.

    Traduire

  6. Hair Dryer Button Switchboard Replacement, Button Switchboard: étape 5, image 1 de 1

    • Using a Phillips #1 Screwdriver, remove the screws located on the hair dryer handle.

    Traduire

  7. Hair Dryer Button Switchboard Replacement: étape 6, image 1 de 1

    • Using a plastic opening tool, carefully remove the front face of the hair dryer plastic case.

    Traduire

  8. Hair Dryer Button Switchboard Replacement: étape 7, image 1 de 1

    • The hair dryer is now disassembled. The fan, motor, heating element cover, and internal wiring are exposed.

    • Identify the turbo button.

    • Identify the button switchboard.

    Traduire

  9. Hair Dryer Button Switchboard Replacement: étape 8, image 1 de 1

    • Gently pull the turbo button away from the hair dryer body.

    • If the turbo setting is still not working after you replace the switchboard, consider using soldering techniques to replace the turbo button .

    Traduire

  10. Hair Dryer Button Switchboard Replacement: étape 9, image 1 de 1

    • Gently pull the button switchboard away from the hair dryer body.

    • Using a desoldering wick and a soldering iron, desolder the wires.

    • Refer to the following page for desoldering instructions: Soldering Skills

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 11 autres contributeurs

Mitch

Membre depuis le 10/04/12

34 Réputation

5 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

Cal Poly, Team 24-29, Regan Fall 2012 Membre de l'équipe Cal Poly, Team 24-29, Regan Fall 2012

CPSU-REGAN-F12S24G29

5 membres

6 tutoriels rédigés

Un commentaire

I have a hairdryer with loose wire. Can you help me to find where the wire should be welded?

ziad musa - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 4

7 derniers jours : 15

30 derniers jours : 64

Total : 8,330