Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Hair Dryer Fan/ Motor Assembly Replacement

Ce dont vous avez besoin

  1. Hair Dryer Fan/ Motor Assembly Replacement, Nozzle: étape 1, image 1 de 2 Hair Dryer Fan/ Motor Assembly Replacement, Nozzle: étape 1, image 2 de 2
    • Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

    • If nozzle is not attached, skip to next step.

  2. Hair Dryer Fan/ Motor Assembly Replacement, Grating: étape 2, image 1 de 1
    • Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

    • For most hair dryers, use a Phillips #1 screwdriver. For hair dryers with smaller screws, consider using a Phillips #00 screwdriver.

  3. Hair Dryer Fan/ Motor Assembly Replacement: étape 3, image 1 de 1
    • Detach the hair dryer grating from the body by gently twisting the grating from side to side.

  4. Hair Dryer Fan/ Motor Assembly Replacement: étape 4, image 1 de 1
    • Separate the hair dryer grating into the three pieces seen in the image.

  5. Hair Dryer Fan/ Motor Assembly Replacement, Fan/ Motor Assembly: étape 5, image 1 de 1
    • Locate the screws on the handle and remove with a Phillips screwdriver.

  6. Hair Dryer Fan/ Motor Assembly Replacement: étape 6, image 1 de 1
    • Carefully separate the plastic case with the Plastic Opening Tool.

  7. Hair Dryer Fan/ Motor Assembly Replacement: étape 7, image 1 de 1
    • After removing the plastic case, locate the fan towards the back of the hair dryer.

  8. Hair Dryer Fan/ Motor Assembly Replacement: étape 8, image 1 de 1
    • Remove the screw that is holding the fan to the motor using a Phillips screwdriver.

  9. Hair Dryer Fan/ Motor Assembly Replacement: étape 9, image 1 de 1
    • Remove the screws holding the motor to the casing using a Phillips screwdriver.

    • NOTE: This may be unnecessary if the fan can be removed without using a screwdriver.

  10. Hair Dryer Fan/ Motor Assembly Replacement: étape 10, image 1 de 1
    • Isolate the fan from the rest of the dryer.

    • Remove the screws holding the motor in place. Replace with the new component.

  11. Hair Dryer Fan/ Motor Assembly Replacement: étape 11, image 1 de 1
    • Solder the wires to the motor. Refer to the soldering page below, which will help you replace this component.

    • Soldering Skills

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Mitch

Membre depuis le 10/04/12

34 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 24-29, Regan Fall 2012 Membre de l'équipe Cal Poly, Team 24-29, Regan Fall 2012

CPSU-REGAN-F12S24G29

5 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 18

30 derniers jours : 61

Total : 15,839