Aller au contenu principal

Hamilton-T1 Air Intake and Fan Filter Replacement

Matériel médical
Ni iFixit ni ce tutoriel de réparation ne sont approuvés par ou affiliés au fabricant de ce dispositif médical.

Ce dont vous avez besoin

  1. Hamilton-T1 Air Intake and Fan Filter Replacement, Air Intakes and HEPA Filter: étape 1, image 1 de 1
    • The fan filter is located on the side of the ventilator and can be removed and replaced by hand.

  2. Hamilton-T1 Air Intake and Fan Filter Replacement: étape 2, image 1 de 1
    • The air intake filter is located on the rear of the device, and can also be removed by hand.

  3. Hamilton-T1 Air Intake and Fan Filter Replacement: étape 3, image 1 de 1
    • To access the HEPA filter, first remove the screw holding the filter cover in place and gently remove the cover.

  4. Hamilton-T1 Air Intake and Fan Filter Replacement: étape 4, image 1 de 1
    • The HEPA filter can now be removed by hand.

    • Install a new HEPA filter and reattach the back panel.

    • Be sure to test the device and ensure airflow through all filters before use.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Trevor Foley

Membre depuis le 04/10/20

114 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team S11-G24, Paton Spring 2020 Membre de l'équipe Cal Poly, Team S11-G24, Paton Spring 2020

CPSU-PATON-S20S11G24

3 membres

3 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 28

Total : 623