Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Handspring Visor Edge Back Panel Replacement

Ce dont vous avez besoin

  1. Handspring Visor Edge Back Panel Replacement, Back Panel: étape 1, image 1 de 1
    • Remove the six 4.1 mm Phillips screws from the back plate using the #00 Phillips Scewdriver.

  2. Handspring Visor Edge Back Panel Replacement: étape 2, image 1 de 1
    • Remove the black plate from the PDA.

  3. Handspring Visor Edge Back Panel Replacement: étape 3, image 1 de 2 Handspring Visor Edge Back Panel Replacement: étape 3, image 2 de 2
    • Remove four 2.6 mm Philips screws that are on the sides of the frame.

    • Remove the remaining 3.9 mm Philips screw holding together the stylus holster and the frame.

  4. Handspring Visor Edge Back Panel Replacement: étape 4, image 1 de 2 Handspring Visor Edge Back Panel Replacement: étape 4, image 2 de 2
    • Remove the four 2.6 mm Philips screws on the top and bottom of the frame.

  5. Handspring Visor Edge Back Panel Replacement: étape 5, image 1 de 1
    • Remove the white frame from the PDA.

    • The frame may get stuck on the corners so be very gentle when working the corners off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Nick Lazarakis

Membre depuis le 01/23/11

331 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 11-28, Maness Winter 2011 Membre de l'équipe Cal Poly, Team 11-28, Maness Winter 2011

CPSU-MANESS-W11S11G28

4 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 1,097