Aller au contenu principal

Pièces

Aucune pièce spécifiée.

  1. Place Visor Edge face down. Notice the tab connecting the flip cover to the back of the PDA.
    • Place Visor Edge face down.

    • Notice the tab connecting the flip cover to the back of the PDA.

    • Gently push tab forward.

    • Do not pull on the flip cover to try and remove it from the PDA.

  2. Once flip cover is removed, turn over and remove the four 3.9 mm screws connecting the hinge.
    • Once flip cover is removed, turn over and remove the four 3.9 mm screws connecting the hinge.

  3. Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant
  4. Gently pull away the plastic hinge from the cover. Be careful to pull out evenly and not bend the plastic, as it can crack.The spring may also shoot out if it is not pulled out evenly.
    • Gently pull away the plastic hinge from the cover.

    • Be careful to pull out evenly and not bend the plastic, as it can crack.The spring may also shoot out if it is not pulled out evenly.

  5. Turn the hinge piece on its side or use a screwdriver to pull out the spring.
    • Turn the hinge piece on its side or use a screwdriver to pull out the spring.

    • Reinsert new spring.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Blaize Steiger

Membre depuis le 30/01/2011

101 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 11-28, Maness Winter 2011 Membre de l'équipe Cal Poly, Team 11-28, Maness Winter 2011

CPSU-MANESS-W11S11G28

4 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 965