Aller au contenu principal

Harman Kardon Onyx Studio 2 Speakers Replacement

Ce dont vous avez besoin

  1. Harman Kardon Onyx Studio 2 Speakers Replacement, Front Panel: étape 1, image 1 de 3 Harman Kardon Onyx Studio 2 Speakers Replacement, Front Panel: étape 1, image 2 de 3 Harman Kardon Onyx Studio 2 Speakers Replacement, Front Panel: étape 1, image 3 de 3
    • Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.

    Where can I find a new front panel for my speaker

    consomme69 - Réponse

    If I take this off can I put it back on

    Burger King - Réponse

  2. Harman Kardon Onyx Studio 2 Speakers Replacement: étape 2, image 1 de 2 Harman Kardon Onyx Studio 2 Speakers Replacement: étape 2, image 2 de 2
    • Remove the five 14.4 mm T10 Torx screws.

    There are NO torxscrews. You have to pull out the rubber grille grips that are inside the screw holes FIRST, then use a regular sized Phillips head screwdriver to remove the cover. No Torxscrewdiver needed. I found this out after I had already purchased one from you guys.

    phillip columbus - Réponse

    Mi bocina no tiene los 5 tornillos a la vista,tiene las cavidades ciegas, como lo abro???

    Eduardo Heine - Réponse

    Yes there are no Torx screws… you have to remove the rubber grips them the Philip Screws..

    Joe Lim - Réponse

  3. Harman Kardon Onyx Studio 2 Speakers Replacement: étape 3, image 1 de 1
    • Gently pull the front apart from the back.

  4. Harman Kardon Onyx Studio 2 Speakers Replacement: étape 4, image 1 de 2 Harman Kardon Onyx Studio 2 Speakers Replacement: étape 4, image 2 de 2
    • Remove the four wires connecting the front and back panels.

    • Pinch the connector tab and pull gently upwards.

    • Repeat for the other three connectors.

    Please can I get a replacement of my panel to the phone

    Chinedu Ogunedo - Réponse

  5. Harman Kardon Onyx Studio 2 Speakers Replacement, Control Board: étape 5, image 1 de 1
    • Pull the silicone button band off of the outer edge of the speaker.

  6. Harman Kardon Onyx Studio 2 Speakers Replacement: étape 6, image 1 de 2 Harman Kardon Onyx Studio 2 Speakers Replacement: étape 6, image 2 de 2
    • Disconnect the two pressure connections from the circuit board.

  7. Harman Kardon Onyx Studio 2 Speakers Replacement: étape 7, image 1 de 2 Harman Kardon Onyx Studio 2 Speakers Replacement: étape 7, image 2 de 2
    • Gently remove the control board band by placing fingers in contact with it through the button openings.

    • Work from the outer edges in so as not to bend the band.

    From where to buy Control panel

    ali - Réponse

    From where to buy this control panel

    ali - Réponse

  8. Harman Kardon Onyx Studio 2 Speakers Replacement, Circuit Board: étape 8, image 1 de 2 Harman Kardon Onyx Studio 2 Speakers Replacement, Circuit Board: étape 8, image 2 de 2
    • Disconnect the remaining connectors from the circuit board.

    • Disconnect the Bluetooth antenna.

  9. Harman Kardon Onyx Studio 2 Speakers Replacement: étape 9, image 1 de 2 Harman Kardon Onyx Studio 2 Speakers Replacement: étape 9, image 2 de 2
    • Remove the four 10 mm T10 Torx screws.

    • Pull the circuit board out of the device as it is now free.

    I own two of these and the both shut down on their own.. where do I buy the replacement boards from?

    Darren Vincent - Réponse

  10. Harman Kardon Onyx Studio 2 Speakers Replacement, Speakers: étape 10, image 1 de 1
    • Using the metal spudger, gently pry off the two red and black connectors.

  11. Harman Kardon Onyx Studio 2 Speakers Replacement: étape 11, image 1 de 2 Harman Kardon Onyx Studio 2 Speakers Replacement: étape 11, image 2 de 2
    • Remove the four 14.3 mm T10 Torx screws.

  12. Harman Kardon Onyx Studio 2 Speakers Replacement: étape 12, image 1 de 1
    • Pull out the speaker, and if necessary follow these steps to replace the other identical speaker.

    Please attach a link where best to buy parts/speakers for this model. I found your step by step instructions very well detailed except for the source of parts

    Bernard Rocha - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

7 autres ont terminé cette réparation.

Alexandra Achtenberg

Membre depuis le 02/02/17

2 031 Réputation

6 tutoriels rédigés

Équipe

USF Tampa, Team 16-5, Blackwell Spring 2017 Membre de l'équipe USF Tampa, Team 16-5, Blackwell Spring 2017

USFT-BLACKWELL-S17S16G5

3 membres

24 tutoriels rédigés

2 commentaires

Hi, do anyone know sparepart number for woofer elements?

Mikko Lehto - Réponse

Hello.. what is the wattage of the speaker? and where can i get a replacement. how much?

James Santiago - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 16

30 derniers jours : 142

Total : 19,436