Hasbro Bop-It Micro Series Battery Replacement

Introduction

There are no previous steps needed. All that is required is a #0 Phillips Screwdriver, (2) fresh AAA batteries, and a few minutes of time.

Unscrew the (2) #4 Phillips head 8 mm screws on the back cover using a Phillips #0 screwdriver. The screws are captured and do not need to be completely removed from the back cover.

The batteries are now accessible. Remove batteries using fingers or plastic spudger.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Membre depuis le 09/29/16

139 Réputation

2 tutoriels rédigés

IUPUI-HARLEY-F16S3G1

3 membres

10 tutoriels rédigés

uh can you do one for the 2016 bop it