Réparez vos affaires Communauté Boutique

Hasbro Bop-It Micro Series Buttons Replacement

Introduction

If the game is turned on but the Bop-It button(s) does not work, this is because the button inside the device that provides functionality may be broken. To effectively replace them see this step-by-step guide.

Ce dont vous avez besoin

  1. Hasbro Bop-It Micro Series Buttons Replacement, Back Case: étape 1, image 1 de 1

    • Loosen the two captive 8 mm screws in the back cover using a Phillips #0 screwdriver.

    Modifier

  2. Hasbro Bop-It Micro Series Buttons Replacement: étape 2, image 1 de 1

    • Remove the six 6 mm screws from the back cover using a Phillips #0 screwdriver.

    • When removing the final screw, hold the assembly together. There is a spring inside the device which will pop the assembly apart when all the screws are removed.

    Modifier

  4. Hasbro Bop-It Micro Series Buttons Replacement: étape 3, image 1 de 1

    • Carefully separate the two sections, leaving them connected by the wires.

    Modifier

  5. Hasbro Bop-It Micro Series Buttons Replacement, Buttons: étape 4, image 1 de 1

    • Remove the buttons by de-soldering them from the wires they are attached to or from the mother board. Refer to the soldering guide here.

    Modifier

  6. Hasbro Bop-It Micro Series Buttons Replacement: étape 5, image 1 de 1

    • After removing the buttons, solder new, operational buttons back into place.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 5 autres contributeurs

Glenn Haag

Membre depuis le 09/29/16

479 Réputation

3 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

IUPUI, Team 3-1, Harley Fall 2016 Membre de l'équipe IUPUI, Team 3-1, Harley Fall 2016

IUPUI-HARLEY-F16S3G1

3 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 15

Total : 1,882