Réparez vos affaires Communauté Boutique

Hasbro Bop-It Micro Series Speaker Replacement

Introduction

The Hasbro Bop-it Micro Series (B0639000) is more entertaining when the speaker is functional. In this guide, we will be walking through the replacement of the speaker. When replacing the speaker you will need to solder. When the Bop-It Micro stops giving you directions on how to play, is cutting out, has distorted sound, or is very quiet, is when the speaker needs to be replaced.

Ce dont vous avez besoin

  1. Hasbro Bop-It Micro Series Speaker Replacement, Back Case: étape 1, image 1 de 1

    • Loosen the two captive 8 mm screws in the back cover using a Phillips #0 screwdriver.

    Modifier

  2. Hasbro Bop-It Micro Series Speaker Replacement: étape 2, image 1 de 1

    • Remove the six 6 mm screws from the back cover using a Phillips #0 screwdriver.

    • When removing the final screw, hold the assembly together. There is a spring inside the device which will pop the assembly apart when all the screws are removed.

    Modifier

  3. Hasbro Bop-It Micro Series Speaker Replacement: étape 3, image 1 de 1

    • Carefully separate the two sections, leaving them connected by the wires.

    Modifier

  4. Hasbro Bop-It Micro Series Speaker Replacement, Speaker: étape 4, image 1 de 2 Hasbro Bop-It Micro Series Speaker Replacement, Speaker: étape 4, image 2 de 2

    • Remove the (3) #3 Phillips head 6 mm screws using your Phillips #0 screwdriver, and remove the plastic with your fingers.

    Modifier

  5. Hasbro Bop-It Micro Series Speaker Replacement: étape 5, image 1 de 1

    • De-solder the speaker from the wires. Refer to the soldering guide for instructions on how to solder

    Modifier
Conclusion

Follow the steps of this guide in reverse to reassemble.

2 autres ont terminé cette réparation.

Auteur

avec 5 autres contributeurs

Glenn Haag

Membre depuis le 09/29/16

479 Réputation

3 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

IUPUI, Team 3-1, Harley Fall 2016 Membre de l'équipe IUPUI, Team 3-1, Harley Fall 2016

IUPUI-HARLEY-F16S3G1

3 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 16

Total : 1,242