Introduction

The plastic panel on the back protects the components from damage. Because of this is it is necessary to take off the panel to access all of the components in the computer.

Use a #0 Phillips head screwdriver and unscrew the sixteen 7mm screws on the back of the device.
  • Use a #0 Phillips head screwdriver and unscrew the sixteen 7mm screws on the back of the device.

Ajouter un commentaire

Use a plastic opening tool to take off the back plastic panel.
  • Use a plastic opening tool to take off the back plastic panel.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jake Decker

Membre depuis le 14/02/2018

281 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team S6-G6, Eyestone Spring 2018 Membre de l'équipe USF Tampa, Team S6-G6, Eyestone Spring 2018

USFT-EYESTONE-S18S6G6

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 5

Total : 53