1. Remove the stickers covering the screws. These are located on both corners of the screen. (Two in total) Remove the two 7mm screws.
    • Remove the stickers covering the screws. These are located on both corners of the screen. (Two in total)

    • Remove the two 7mm screws.

  2. %Livraison gratuite pour toute commande supérieure à 100,00 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Use a plastic opening tool to pull the plastic screen bezel forward. Remove the 4 7mm screws in the corners holding the screen up. Use a plastic oping tool to pry the screen forward. Lay it on the keyboard.
    • Use a plastic opening tool to pull the plastic screen bezel forward.

    • Remove the 4 7mm screws in the corners holding the screen up.

    • Use a plastic oping tool to pry the screen forward. Lay it on the keyboard.

  4. Peel off the tape that connects the chord to the screen. Carefully unplug chord.
    • Peel off the tape that connects the chord to the screen.

    • Carefully unplug chord.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Desiree Mora

Membre depuis le 14/02/2018

265 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team S6-G6, Eyestone Spring 2018 Membre de l'équipe USF Tampa, Team S6-G6, Eyestone Spring 2018

USFT-EYESTONE-S18S6G6

3 membres

6 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 56