Réparez vos affaires Communauté Boutique

Health o Meter HDR743 Power Supply Replacement

Ce dont vous avez besoin

  1. Health o Meter HDR743 Power Supply Replacement, Power Supply: étape 1, image 1 de 1

    • Connect a voltmeter at the power supply’s connection to the circuit board and the power supply.

    • If the the voltage at the power supply is incorrect, the power supply should be replaced.

    Modifier

  2. Health o Meter HDR743 Power Supply Replacement: étape 2, image 1 de 1

    • Use wire strippers to cut the wired connection to the power supply.

    • If the wires need replacing, you will need to use a soldering iron and remove the connections at the board.

    Modifier

  4. Health o Meter HDR743 Power Supply Replacement: étape 3, image 1 de 1

    • Use the wire strippers to cut off the rubber ends of the power supply wires.

    • Use a soldering iron and solder to fuse the connections between the two wires.

    Modifier

  5. Health o Meter HDR743 Power Supply Replacement: étape 4, image 1 de 2 Health o Meter HDR743 Power Supply Replacement: étape 4, image 2 de 2

    • Test the power supply once the wires have been reconnected.

    • If the Health o Meter still has power issues, check the connections between the new power supply and the board.

    • If no issues are found, the circuit board may need to be replaced.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 8 autres contributeurs

Dennis White Jr

Membre depuis le 04/02/18

217 Réputation

2 tutoriels rédigés

Badges: 4

+ 1 badge de plus

Équipe

University of Memphis, Team S1-G1, Kim Spring 2018 Membre de l'équipe University of Memphis, Team S1-G1, Kim Spring 2018

UM-KIM-S18S1G1

3 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 3

Total : 119