Réparez vos affaires Communauté Boutique

Heyday Round Bluetooth Speaker Disassembly

Introduction

This is a step-by-step guide on how to disassemble a Heyday Round Bluetooth Speaker to reveal its inner components. You may need to disassemble this product if there is an issue being caused by something inside the speaker and you need to repair it.

Ce dont vous avez besoin

  1. Heyday Round Bluetooth Speaker Disassembly, Heyday Round Bluetooth Speaker: étape 1, image 1 de 2 Heyday Round Bluetooth Speaker Disassembly, Heyday Round Bluetooth Speaker: étape 1, image 2 de 2

    • Use a metal spudger to pry the fabric-covered top off of the speaker.

    Modifier

  2. Heyday Round Bluetooth Speaker Disassembly: étape 2, image 1 de 1

    • Use a Phillips #0 screwdriver to remove the twelve screws around the perimeter of the inner plastic shell.

    Modifier

  3. Heyday Round Bluetooth Speaker Disassembly: étape 3, image 1 de 1

    • Remove the inner shell from the back case.

    • Don't yank or pull the shell case off the bottom case. There are cables connecting the two and they could be damaged if pulled.

    Modifier

  4. Heyday Round Bluetooth Speaker Disassembly: étape 4, image 1 de 1

    • Once the hardware is opened by the screwdriver, both sides of the motherboard will be exposed and ready for any needed repairs.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order, from step 3 to step 1.

Auteur

avec 4 autres contributeurs

Hunter Brown

Membre depuis le 09/22/22

185 Réputation

1 tutoriel rédigé

Badges: 3

Équipe

University of North Texas, Team 4-4, Saru Jimmy Fall 2022 Membre de l'équipe University of North Texas, Team 4-4, Saru Jimmy Fall 2022

UNT-SARU JIMMY-F22S4G4

4 membres

3 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 16

Total : 1,096