Réparez vos affaires Communauté Boutique

Homedics UHE-CMP15 Wick Replacement

Introduction

If your humidifier has stopped absorbing water, you might need to replace the old wick from the humidifier with a new one. For this guide, you do not need any tools but you do need a replacement wick to place inside the lid.

  1. Homedics UHE-CMP15 Wick Replacement, Wick: étape 1, image 1 de 1

    • Unscrew the top half of the device from the container and place the lid upside down.

    • The container should unscrew counter clockwise

    Modifier

  2. Homedics UHE-CMP15 Wick Replacement: étape 2, image 1 de 1

    • Pull the wick holder out from the bottom of the lid.

    • Grasp onto the plastic wick holder and pull upwards until it pops free.

    Modifier

  4. Homedics UHE-CMP15 Wick Replacement: étape 3, image 1 de 1

    • Remove the old wick from the wick holder.

    • Tilt the wick holder to the side and gently slide the wick out of its container.

    Modifier

  5. Homedics UHE-CMP15 Wick Replacement: étape 4, image 1 de 1

    • Place new wick into the wick holder.

    • Grab a replacement wick from the box the humidifier came in and gently slide it into the wick holder.

    Modifier

  6. Homedics UHE-CMP15 Wick Replacement: étape 5, image 1 de 1

    • Insert wick holder back into the lid.

    • Grab the wick holder and insert it into the lid on the end where the wick itself enters the lid and the spring side remains in the air.

    Modifier
Conclusion

To reassemble your device, screw the lid back onto the container and turn it on.

Auteur

avec 2 autres contributeurs

Dylan

Membre depuis le 10/30/23

337 Réputation

3 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

UMass Dartmouth, Team 3-6, Konn Fall 2023 Membre de l'équipe UMass Dartmouth, Team 3-6, Konn Fall 2023

UMASSD-KONN-F23S3G6

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 8

Total : 104