Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Flip your amp over to begin removing the plastic cover.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the battery cover and take the battery out.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Unscrew the four corner screws using a phillips #0 screw driver to remove the back cover.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the back cover by carefully pushing the battery connector through the hole in the cover.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
With the phillips #0 screwdriver, unscrew the two white plastic clips that hold the speaker in place.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use flush wire cutters to remove black and red wires from the old speaker.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Connect the new speaker by soldering the black and red wires to the negative and positive connections respectively
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Connect the battery and turn the power on to test proper connection of the new speaker.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Connect the amp to your favorite instrument and test out the new sound!
-
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.