Aller au contenu principal

Introduction

This guide will show you how to replace the wheels of your device. This would be needed if your device fails to roll on the flooring or if they simply broke apart. Be sure to remove the battery from the device and switch the power off.

Pièces

Aucune pièce spécifiée.

  1. Detach the rolling assembly  from the body by pushing the button found at the base.
    • Detach the rolling assembly from the body by pushing the button found at the base.

  2. Remove the seven 7.5mm Phillips #1 screws from the brush retainer.
    • Remove the seven 7.5mm Phillips #1 screws from the brush retainer.

  3. Remove the brush and retainer from the rolling assembly. The brush will need to be disconnected from the belt.
    • Remove the brush and retainer from the rolling assembly.

    • The brush will need to be disconnected from the belt.

  4. Remove the eight 4mm Phillips #1 screws from the bottom panel.
    • Remove the eight 4mm Phillips #1 screws from the bottom panel.

  5. Remove the bottom panel.
    • Remove the bottom panel.

  6. Remove the motor.
    • Remove the motor.

  7. Remove the black plastic clamp from inside the wheel axle. Remove the black plastic clamp from inside the wheel axle.
    • Remove the black plastic clamp from inside the wheel axle.

  8. Remove broken wheel and replace. Remove broken wheel and replace. Remove broken wheel and replace.
    • Remove broken wheel and replace.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Sara Vlhova

Membre depuis le 25/01/2018

496 Réputation

4 tutoriels rédigés

Équipe

USF Tampa, Team S7-G4, Passmore Spring 2018 Membre de l'équipe USF Tampa, Team S7-G4, Passmore Spring 2018

USFT-PASSMORE-S18S7G4

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 12

Total : 234