Réparez vos affaires Communauté Boutique

Hoover Power Path Pro Advanced Power Switch Replacement

Introduction

The power switch allows the Hoover Power Path Pro Advanced to turn on with the press of the power button. A defective power switch will not allow the user to control the on and off state of the device and needs to be replaced.

Ce dont vous avez besoin

  1. Hoover Power Path Pro Advanced Power Switch Replacement, Power Switch: étape 1, image 1 de 1

    • Remove the lower brushroll from the bottom of the cleaner.

    Modifier

  2. Hoover Power Path Pro Advanced Power Switch Replacement: étape 2, image 1 de 1

    • Use a long #2 Philips head to remove the 8 numbered screws on the bottom of the cleaner (They will also be indicated on the bottom of the vacuum).

    Modifier

  3. Hoover Power Path Pro Advanced Power Switch Replacement: étape 3, image 1 de 2 Hoover Power Path Pro Advanced Power Switch Replacement: étape 3, image 2 de 2

    • Pull the red handle to remove the front suction unit from the cleaner.

    Modifier

  5. Hoover Power Path Pro Advanced Power Switch Replacement: étape 4, image 1 de 1

    • Unscrew the hose by using a Phillips #2 to detach it from the top cover of the cleaner.

    Modifier

  6. Hoover Power Path Pro Advanced Power Switch Replacement: étape 5, image 1 de 2 Hoover Power Path Pro Advanced Power Switch Replacement: étape 5, image 2 de 2

    • Push down on the handle release button. Lift the edge of top cover connected to this button.

    • Repeat the above step for the "On/Off" button.

    • Pull entire top cover off.

    • Caution: when pulling the handle release button, make sure the top of the cleaner does not fall.

    Modifier

  7. Hoover Power Path Pro Advanced Power Switch Replacement: étape 6, image 1 de 1

    • Remove the "On/Off" cap by pulling it upwards with caution.

    Modifier

  8. Hoover Power Path Pro Advanced Power Switch Replacement: étape 7, image 1 de 1

    • Use a long #2 Philips head to remove the two screws from the arched grey piece.

    Modifier

  9. Hoover Power Path Pro Advanced Power Switch Replacement: étape 8, image 1 de 2 Hoover Power Path Pro Advanced Power Switch Replacement: étape 8, image 2 de 2

    • Pull out the red power the red power switch.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Auteur

avec 3 autres contributeurs

Jose Andres Gonzalez Valdes

Membre depuis le 01/22/18

682 Réputation

5 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

Cal Poly, Team S16-G5, Banghart Winter 2018 Membre de l'équipe Cal Poly, Team S16-G5, Banghart Winter 2018

CPSU-BANGHART-W18S16G5

5 membres

15 tutoriels rédigés

3 commentaires

What is the part number?

martahayner - Réponse

Thanks so much!!

debmccrimm - Réponse

you have to test the switch, mine tested ok which led me to the fuse between the motor and switch. It was bad, parts warehouse part # 440004065 does the trick.

frank - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 16

Total : 3,518