Réparez vos affaires Communauté Boutique

Hoover T-Series WindTunnel Pet UH30310 Motor Replacement

Introduction

The motor is the most important part of the vacuum as without it, the vacuum cannot create suction. This is a walkthrough on how to replace the motor.

Ce dont vous avez besoin

  1. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement, Motor: étape 1, image 1 de 1

    • Depress the hose-release tab.

    Traduire

  2. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: étape 2, image 1 de 1

    • Next, remove the hose from the connector, near the top of the vacuum's rear. This can be achieved by twisting and then pulling down.

    Traduire

  3. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: étape 3, image 1 de 1

    • Use a Phillips #1 screwdriver to remove the two screws on the part holding the hose to the back of the vacuum.

    Traduire

  4. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: étape 4, image 1 de 1

    • Use a Phillips #1 screwdriver to remove the two screws that secure the hose-release tab.

    Traduire

  6. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: étape 5, image 1 de 1

    • Use a Phillips #1 screwdriver to remove the two screws on the top of the vacuum holding the tab on the left of the vacuum.

    Traduire

  7. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: étape 6, image 1 de 2 Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: étape 6, image 2 de 2

    • Use a Phillips #1 screwdriver to remove the two screws on the top of the vacuum head holding down the tab on the right.

    • To remove the tab, slide backwards and then pull up. There is a tab holding the piece down so use force if necessary.

    Traduire

  8. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: étape 7, image 1 de 2 Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: étape 7, image 2 de 2

    • Slide the belt off of the metal rod on the left of the vacuum shaft. Pull the vacuum up and it should easily separate into two pieces.

    Traduire

  9. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: étape 8, image 1 de 3 Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: étape 8, image 2 de 3 Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: étape 8, image 3 de 3

    • Use a Phillips #1 screwdriver to remove the 6 screws on the back and bottom of the vacuum shaft.

    Traduire

  10. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: étape 9, image 1 de 1

    • The top of the motor casing should then fold open, revealing the motor.

    Traduire

  11. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: étape 10, image 1 de 2 Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: étape 10, image 2 de 2

    • The motor can now be accessed for replacement or repair

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Anthony Garcia

Membre depuis le 01/18/18

223 Réputation

1 tutoriel rédigé

Badges: 5

+ 2 badges supplémentaires

Équipe

Cal Poly, Team S12-G4, Banghart Winter 2018 Membre de l'équipe Cal Poly, Team S12-G4, Banghart Winter 2018

CPSU-BANGHART-W18S12G4

5 membres

9 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 8

Total : 894