Introduction

Replace your dirty or broken dust cup filter with these easy steps!

Outils

Pièces

Press button on the top of the dust cup and pull back.
  • Press button on the top of the dust cup and pull back.

  • Remove dust cup from vacuum

Ajouter un commentaire

Pull back on black lever and rotate dust cup lid back.
  • Pull back on black lever and rotate dust cup lid back.

Ajouter un commentaire

  • Lift up on fabric flap to remove filter from vaccum

  • If you wish to clean the filter rather than replace it, it can be washed under a faucet.

  • If washing the filter, make sure it fully dries out before re-installing.

Ajouter un commentaire

  • Holding onto both the top handle and dust cup body, twist the two components apart following the instructions printed on the back.

Ajouter un commentaire

  • Unscrew the three 4 cm Phillips #3 screws located inside the dust filter compartment to detach the dust filter system.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Chino Cruz

Membre depuis le 22/01/2018

135 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team S11-G4, Banghart Winter 2018 Membre de l'équipe Cal Poly, Team S11-G4, Banghart Winter 2018

CPSU-BANGHART-W18S11G4

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 8

Total : 47