Aller au contenu principal

Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement

Ce dont vous avez besoin

  1. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement, Primary Air Filter: étape 1, image 1 de 1
    • Press button on the top of the dust cup and pull back.

    • Remove dust cup from vacuum

  2. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: étape 2, image 1 de 1
    • Pull back on black lever and rotate dust cup lid back.

  3. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: étape 3, image 1 de 1
    • Lift up on fabric flap to remove filter from vaccum

    • If you wish to clean the filter rather than replace it, it can be washed under a faucet.

    • If washing the filter, make sure it fully dries out before re-installing.

  4. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement, Dust Cup Assembly: étape 4, image 1 de 1
    • Holding onto both the top handle and dust cup body, twist the two components apart following the instructions printed on the back.

  5. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: étape 5, image 1 de 2 Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: étape 5, image 2 de 2
    • Unscrew the three 4 cm Phillips #3 screws located inside the dust filter compartment to detach the dust filter system.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Chino Cruz

Membre depuis le 01/22/18

135 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team S11-G4, Banghart Winter 2018 Membre de l'équipe Cal Poly, Team S11-G4, Banghart Winter 2018

CPSU-BANGHART-W18S11G4

5 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 5

30 derniers jours : 48

Total : 4,559