Introduction

The Hoover Windtunnel 2 Rewind's hose sometimes leaks while the vacuum is working. This means that the device needs a new hose. You can find replacement hoses at your local Hoover retailer.

Outils

Aucun outil requis.

Pièces

Detach the top of the hose from the device by pressing the release button and pulling up on the hose.
  • Detach the top of the hose from the device by pressing the release button and pulling up on the hose.

Ajouter un commentaire

Remove the other end of the hose by twisting the hose clockwise and pulling it off.
  • Remove the other end of the hose by twisting the hose clockwise and pulling it off.

Ajouter un commentaire

  • Firmly insert the larger end of the replacement hose into the upward facing hole in the vacuum.

Ajouter un commentaire

  • Line up the smaller end of the hose and insert it into the downward facing hole.

  • Twist the hose until it locks.

Ajouter un commentaire

Conclusion

The Hoover Windtunnel 2 Rewind must have a solid and functional hose to work correctly. With this set of instructions, it is easy to replace a leaky hose.

Mickey McGuire

Membre depuis le 22/01/2018

109 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team S11-G4, Banghart Winter 2018 Membre de l'équipe Cal Poly, Team S11-G4, Banghart Winter 2018

CPSU-BANGHART-W18S11G4

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 6

7 derniers jours : 41

30 derniers jours : 231

Total : 704