Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Pièces

Aucune pièce spécifiée.

  1. Locate the two screws on the back of the car towards the front. Use a #J0 JIS screw to loosen the screws. Locate the two screws on the back of the car towards the front. Use a #J0 JIS screw to loosen the screws.
    • Locate the two screws on the back of the car towards the front. Use a #J0 JIS screw to loosen the screws.

  2. Locate the next six screws and use a #J0 JIS Screw to take them off. Locate the next six screws and use a #J0 JIS Screw to take them off.
    • Locate the next six screws and use a #J0 JIS Screw to take them off.

  3. Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch

    Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch
  4. Remove the back-cover off and make sure there are no rust or disconnected wires.
    • Remove the back-cover off and make sure there are no rust or disconnected wires.

  5. Locate the receiver which is towards the back end of the car. Replace the receiver by disconnecting the wires.
    • Locate the receiver which is towards the back end of the car.

    • Replace the receiver by disconnecting the wires.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Peter Nguyen

Membre depuis le 07/09/2018

243 Réputation

2 tutoriels rédigés

What size is the motor, so I can order prior to starting the repair? Also, can I slightly upgrade the motor for a faster car?

darsehole - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 9

Total : 215