Aller au contenu principal

Hover-1 Chrome Bluetooth Speaker Replacement

Ce dont vous avez besoin

  1. Hover-1 Chrome Bluetooth Speaker Replacement, Bluetooth Speaker: étape 1, image 1 de 1
    • Flip the Hover-1 Chrome upside down.

    • Use a Phillips #2 screwdriver to remove the fourteen 14 mm screws from the bottom of the Hover-1.

    • Break the two black tape circles, and remove the two 15 mm Phillips screws underneath.

  2. Hover-1 Chrome Bluetooth Speaker Replacement: étape 2, image 1 de 1
    • Lift the shell without the speaker grille and unplug the battery.

  3. Hover-1 Chrome Bluetooth Speaker Replacement: étape 3, image 1 de 1
    • Lift the shell with the speaker grille so the speaker can be accessed.

    • Remove the three 14 mm Phillips #2 screws holding the speaker to the bottom left shell.

  4. Hover-1 Chrome Bluetooth Speaker Replacement: étape 4, image 1 de 3 Hover-1 Chrome Bluetooth Speaker Replacement: étape 4, image 2 de 3 Hover-1 Chrome Bluetooth Speaker Replacement: étape 4, image 3 de 3
    • Pull off the bracket holding the speaker in place.

    • Place the speaker to the side so that the tab on the cable connector to the sound card can be accessed.

  5. Hover-1 Chrome Bluetooth Speaker Replacement: étape 5, image 1 de 2 Hover-1 Chrome Bluetooth Speaker Replacement: étape 5, image 2 de 2
    • Disconnect the cable attaching the speaker to the sound card.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Nick McGuire

Membre depuis le 10/08/18

551 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team S4-G1, White Fall 2018 Membre de l'équipe Cal Poly, Team S4-G1, White Fall 2018

CPSU-WHITE-F18S4G1

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 628