Réparez vos affaires Communauté Boutique

Hover-1 Coast Board Battery Replacement

Introduction

In order for your Hover-1 Coast to be used for its intended purpose you must have a functioning battery. This procedure is fairly easy to accomplish and key to using the board to its full potential.

Ce dont vous avez besoin

  1. Hover-1 Coast Board Battery Replacement, Board Battery: étape 1, image 1 de 3 Hover-1 Coast Board Battery Replacement, Board Battery: étape 1, image 2 de 3 Hover-1 Coast Board Battery Replacement, Board Battery: étape 1, image 3 de 3

    • To remove the battery on the Hover-1 Coast, you must uncover the screws on the top of the board.

    • Using a pick tool, puncture the grip tape and expose the screws.

    • Loosen all four 1" screws using a Phillips #1 screwdriver.

    Traduire

  2. Hover-1 Coast Board Battery Replacement: étape 2, image 1 de 3 Hover-1 Coast Board Battery Replacement: étape 2, image 2 de 3 Hover-1 Coast Board Battery Replacement: étape 2, image 3 de 3

    • Now pull the black protective cover off the board.

    • Locate the battery.

    Traduire

  4. Hover-1 Coast Board Battery Replacement: étape 3, image 1 de 3 Hover-1 Coast Board Battery Replacement: étape 3, image 2 de 3 Hover-1 Coast Board Battery Replacement: étape 3, image 3 de 3

    • The battery is connected by these two sets of wires.

    • Remove the yellow wire first by pulling the two wires gently in opposite directions.

    • Now pull apart the black wire by gently pulling the two wires in opposite directions.

    Traduire

  5. Hover-1 Coast Board Battery Replacement: étape 4, image 1 de 3 Hover-1 Coast Board Battery Replacement: étape 4, image 2 de 3 Hover-1 Coast Board Battery Replacement: étape 4, image 3 de 3

    • Once the battery has been disconnected, gently pry the battery upward.

    • It is important to use a plastic opening tool to avoid puncturing the battery.

    • Once the battery is freed, remove it with your hands.

    • The battery is glued to the case and will require some effort to remove.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 2 autres contributeurs

Jace Oppenlander

Membre depuis le 10/04/18

545 Réputation

4 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

Linn Benton Community College, Team S2-G2, Karnes Fall 2018 Membre de l'équipe Linn Benton Community College, Team S2-G2, Karnes Fall 2018

LBCC-KARNES-F18S2G2

3 membres

5 tutoriels rédigés

Un commentaire

Where can you order a replacement battery?

Phil - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 6

30 derniers jours : 14

Total : 612