Aller au contenu principal

Hover-1 Coast Wheel Replacement

Ce dont vous avez besoin

  1. Hover-1 Coast Wheel Replacement, Wheel: étape 1, image 1 de 1
    • Identify the wheel you are wanting to replace.

  2. Hover-1 Coast Wheel Replacement: étape 2, image 1 de 2 Hover-1 Coast Wheel Replacement: étape 2, image 2 de 2
    • Find the Socket wrench located in the Hover-1 Coast packaging.

    • Use the 9/16 inch side to loosen the skateboard nut by turning counterclockwise.

  3. Hover-1 Coast Wheel Replacement: étape 3, image 1 de 3 Hover-1 Coast Wheel Replacement: étape 3, image 2 de 3 Hover-1 Coast Wheel Replacement: étape 3, image 3 de 3
    • Remove the nut off the axle.

    • Remove the washer off the axle.

  4. Hover-1 Coast Wheel Replacement: étape 4, image 1 de 3 Hover-1 Coast Wheel Replacement: étape 4, image 2 de 3 Hover-1 Coast Wheel Replacement: étape 4, image 3 de 3
    • To avoid losing any parts, place them on a flat surface.

    • Slide the unwanted wheel off the axle.

    • Slide the new wheel on the axle.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jace Oppenlander

Membre depuis le 10/04/18

545 Réputation

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 407