Introduction

Battery is the major element to provide electricity for hover board. When the battery is damaged, replacing the battery to keep the hover board running.

  1. First, remove both of the top outer cover (left and right side) by unscrewing the twenty screws using the number 1 Philips screwdriver in  iFixit Toolkit's that connect the top and bottom outer cover.
    • First, remove both of the top outer cover (left and right side) by unscrewing the twenty screws using the number 1 Philips screwdriver in iFixit Toolkit's that connect the top and bottom outer cover.

  2. Once removed the outer layer, unscrew all the screws that screwed the cover for the battery (e.g. the one pointed by red arrow in figure 1) using the number 1 Philips screwdriver in the iFixit Toolkit.
    • Once removed the outer layer, unscrew all the screws that screwed the cover for the battery (e.g. the one pointed by red arrow in figure 1) using the number 1 Philips screwdriver in the iFixit Toolkit.

    • After unscrew the screws, move away the plastic cover on the top of the battery. Unplug the cables that connect to the battery and replace a new battery.

Conclusion

The guide has three major steps and each step have three photos that shown the instructions. To reassemble the device, follow these instructions in reverse order.

Ziru Mo

Membre depuis le 22/10/2018

97 Réputation

1 tutoriel rédigé

Équipe

UC Davis, Team S7-G2, Lore Fall 2018 Membre de l'équipe UC Davis, Team S7-G2, Lore Fall 2018

UCD-LORE-F18S7G2

3 membres

4 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 11

Total : 40