Aller au contenu principal

Hover-1 Maverick Battery Replacement

Ce dont vous avez besoin

  1. Hover-1 Maverick Battery Replacement, Battery: étape 1, image 1 de 2 Hover-1 Maverick Battery Replacement, Battery: étape 1, image 2 de 2
    • Remove the twenty 15mm Phillips #1 screws from the shell of the hoverboard.

    • Remove the shell.

  2. Hover-1 Maverick Battery Replacement: étape 2, image 1 de 3 Hover-1 Maverick Battery Replacement: étape 2, image 2 de 3 Hover-1 Maverick Battery Replacement: étape 2, image 3 de 3
    • Remove the four 8mm Phillips #1 screws holding down the black plastic casing.

    • Lift off the black plastic retaining bracket.

  3. Hover-1 Maverick Battery Replacement: étape 3, image 1 de 2 Hover-1 Maverick Battery Replacement: étape 3, image 2 de 2
    • Pull the battery upward lightly to remove from the device.

    • The battery is secured to the device with adhesive tape.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Piper Feldman

Membre depuis le 01/23/20

409 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team S2-G2, White Winter 2020 Membre de l'équipe Cal Poly, Team S2-G2, White Winter 2020

CPSU-WHITE-W20S2G2

2 membres

4 tutoriels rédigés

2 commentaires

What voltage should the battery put out? Mines is 30v, charger is green at the wall but still the board won’t turn on

Barry Rogers - Réponse

Where can I find that same battery i cant find one

Toad Blue - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 4

7 derniers jours : 25

30 derniers jours : 70

Total : 2,842