Aller au contenu principal

Hover-1 Superstar Speaker Replacement

Ce dont vous avez besoin

  1. Hover-1 Superstar Speaker Replacement, Bottom Case: étape 1, image 1 de 3 Hover-1 Superstar Speaker Replacement, Bottom Case: étape 1, image 2 de 3 Hover-1 Superstar Speaker Replacement, Bottom Case: étape 1, image 3 de 3
    • Flip your Hover-1 Superstar device upside down.

    • Using a Phillips #1 screwdriver, remove all twenty of the 18mm screws holding the case onto the device.

    • Remove the bottom case. Be careful of the connector holding the case and the device together.

  2. Hover-1 Superstar Speaker Replacement: étape 2, image 1 de 1
    • Locate the cable connected to the front lights.

    • Pull apart the wires until the black clip separates.

  3. Hover-1 Superstar Speaker Replacement, Speaker: étape 3, image 1 de 1
    • Unplug the white connector that connects the speaker itself with the circuit board attached to the bottom of the device case.

  4. Hover-1 Superstar Speaker Replacement: étape 4, image 1 de 1
    • Unscrew all three 9mm screws with a Phillips #0 screwdriver securing the speaker to the device case.

  5. Hover-1 Superstar Speaker Replacement: étape 5, image 1 de 1
    • Remove the speaker from its port.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Keegan

Membre depuis le 10/04/18

632 Réputation

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 6

Total : 266