Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

After years of use, you might need to replace the Klickfix mounting plate on your Aqua Box. It just takes a few steps—read on to find out how.

  1. Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver. Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver. Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver.
    • Loosen all 4 screws on the mounting plate by holding the nuts on the outside with a socket wrench #7 and unscrewing the screws with a standard Phillips #2 screwdriver.

  2. Replace the defective plate with the new plate.
    • Replace the defective plate with the new plate.

Conclusion

To finish the repair follow the instructions in reverse order.

Merci à ces traducteurs :

de en

100%

Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›

VAUDE Reparaturteam

Membre depuis le 22/02/2016

5 814 Réputation

32 tutoriels rédigés

Équipe

Vaudesport Membre de l'équipe Vaudesport

Community

3 membres

91 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 7

30 derniers jours : 43

Total : 930