Réparez vos affaires Communauté Boutique

How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes

Introduction

With mechanical disc brakes, we adjust brakes if our brake lever pulls all the way into the handle bar. This guide will show how to adjust those brakes, specifically Tektro Aries MD-M300. However, this process should work with other mechanical brakes too. The process is quite easy and anyone can complete the guide without extensive knowledge of bicycles.

Ce dont vous avez besoin

  1. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes, How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: étape 1, image 1 de 1

    • You will see a cable attached to an Allen bolt.

    Modifier

  2. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: étape 2, image 1 de 1

    • Loosen up the bolt with the help of Hex key set.

    Modifier

  3. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: étape 3, image 1 de 2 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: étape 3, image 2 de 2

    • Now, pull the cable as much as you can.

    Modifier

  5. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: étape 4, image 1 de 1

    • Tighten up the bolt while you keep pulling the cable.

    Modifier

  6. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: étape 5, image 1 de 2 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: étape 5, image 2 de 2

    • To center the caliper for a smooth breaking experience, loosen up the two bolts of the brake situated at top and at bottom.

    Modifier

  7. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: étape 6, image 1 de 1

    • Now, put the brake on.

    Modifier

  8. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: étape 7, image 1 de 3 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: étape 7, image 2 de 3 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: étape 7, image 3 de 3

    • While putting the brake on, tighten up both the bolts.

    • You are finished adjusting the brakes!

    Modifier
Ligne d'arrivée

2 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Md Abdullah

Membre depuis le 07/03/21

201 Réputation

1 tutoriel rédigé

Badges: 5

+ 2 badges supplémentaires

Équipe

York University, Team S2-G3, Melo-Thaiss Summer 2021 Membre de l'équipe York University, Team S2-G3, Melo-Thaiss Summer 2021

YORK-MELO-THAISS-SU21S2G3

1 membre

1 tutoriel rédigé

Un commentaire

Dude, the cable is attached incorrectly. The cable routes up and over the little arm.

Grandy - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 7

7 derniers jours : 54

30 derniers jours : 228

Total : 4,202