Introduction
Hi everyone, in this guide, I'll show you how to calibrate the gimbal camera on the DJI Mini 3 Pro drone.
Download links
Python: https://www.python.org/
PySerial: https://pypi.org/project/pyserial/#files
Github: https://github.com/o-gs/dji-firmware-too...
7-zip: https://7-zip.org/
Script to start calibration
Step 1: py comm_og_service_tool.py --port com pcode GimbalCalib JointCoarse
Step 2: py comm_og_service_tool.py --port com pcode GimbalCalib LinearHall
As of 28 Dec 2022, DJI Firmware Tools does not support the Mini 3 Pro
Instructions vidéo
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
20 commentaires
The software doesn't list mini 3 pro as one of the supported drones. How to go about it?
Rakesh Menon - Réponse
waiting for software update
Arty -
I have seen posts where people have used code from Mavic mini 1st series to mini 2 or mini SE and the calibration process was successful.
Arty -
This guide is not suitable for Mini 3 Pro. For now, it's impossible to recalibrate the gimbal on Mini 3 Pro without specialized authorized software.
Anton - Réponse
Mavic 3 is already supported, probably Mini 3 will be supported in the next update.
Arty -