Aller au contenu principal

How to Change Strings on a Ukulele

Ce dont vous avez besoin

  1. How to Change Strings on a Ukulele, String: étape 1, image 1 de 1
    • Start by loosening the string you are trying to replace by twisting the pegs.

    • The G and C tuning pegs turn up to tighten and down to loosen while the E and A tuning pegs turn down to tighten and up to loosen.

  2. How to Change Strings on a Ukulele: étape 2, image 1 de 1
    • Next, grab the new string you are using to replace.

    • The packaging will inform you of which string replaces which note—some are different than others so pay attention!

  3. How to Change Strings on a Ukulele: étape 3, image 1 de 1
    • Feed the string through the tie block.

    • Remember to leave slack.

  4. How to Change Strings on a Ukulele: étape 4, image 1 de 1
    • Wrap the string over the tie block and back underneath itself.

  5. How to Change Strings on a Ukulele: étape 5, image 1 de 2 How to Change Strings on a Ukulele: étape 5, image 2 de 2
    • Recross the string over itself again, looping it two or three more times.

  6. How to Change Strings on a Ukulele: étape 6, image 1 de 1
    • Pinch the string and pull tightly.

  7. How to Change Strings on a Ukulele: étape 7, image 1 de 1
    • Now, fasten the string back to the headstock. To do this, feed the string through the hole in the turning peg.

  8. How to Change Strings on a Ukulele: étape 8, image 1 de 1
    • Twist again to tighten and cut off extra string once complete.

Ligne d'arrivée

2 autres ont terminé cette réparation.

Emily Cunnington

Membre depuis le 09/26/18

211 Réputation

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 11

Total : 576