Introduction

Over time debris can build up on the print head nozzle causing irregular flow resulting in poor print quality.

Pièces

Aucune pièce nécessaire.

The printer needs to be on in order to change the ink cartridges.
  • The printer needs to be on in order to change the ink cartridges.

Ajouter un commentaire

To locate the ink cartridges the paper output tray must be in the lowered position.
  • To locate the ink cartridges the paper output tray must be in the lowered position.

  • Next lift the scanning unit until the scanning support is vertical.

  • Lower the scanning unit until the scanning unit support seats in the scanning unit support slot.

Ajouter un commentaire

  • Allow the printer to position the ink cartridge carrier into the ink cartridge removal location.

    • Before replacing the ink cartridge ensure the correct ink cartridge is installed.

  • Push down on the front edge of the ink cartridge.

    • Observe the angle at which the ink cartridge is removed.

  • Grasp ink cartridge and pull up and out to remove.

Ajouter un commentaire

  • Hold the ink cartridge with the ink nozzle facing up. Using a paper towel firmly wipe the entire ink nozzle.

    • Repeat until the nozzle appears free of any ink and debris.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Garret Wescott

Membre depuis le 23/10/2014

591 Réputation

4 tutoriels rédigés

Équipe

Michigan Tech, Team 1-5, Lauer Fall 2014 Membre de l'équipe Michigan Tech, Team 1-5, Lauer Fall 2014

MTU-LAUER-F14S1G5

3 membres

5 tutoriels rédigés

is ther an easy way to gain access to the roller at the rear of the machine to clean it

hope342 - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 11

30 derniers jours : 97

Total : 2,442