Aller au contenu principal

How to Clean Canon PIXMA MP190 Print Head Nozzle

  1. How to Clean Canon PIXMA MP190 Print Head Nozzle, Turn printer on.: étape 1, image 1 de 1
    • The printer needs to be on in order to change the ink cartridges.

  2. How to Clean Canon PIXMA MP190 Print Head Nozzle, Locate Ink Cartridges: étape 2, image 1 de 3 How to Clean Canon PIXMA MP190 Print Head Nozzle, Locate Ink Cartridges: étape 2, image 2 de 3 How to Clean Canon PIXMA MP190 Print Head Nozzle, Locate Ink Cartridges: étape 2, image 3 de 3
    • To locate the ink cartridges the paper output tray must be in the lowered position.

    • Next lift the scanning unit until the scanning support is vertical.

    • Lower the scanning unit until the scanning unit support seats in the scanning unit support slot.

  3. How to Clean Canon PIXMA MP190 Print Head Nozzle, Remove Ink Cartridge: étape 3, image 1 de 3 How to Clean Canon PIXMA MP190 Print Head Nozzle, Remove Ink Cartridge: étape 3, image 2 de 3 How to Clean Canon PIXMA MP190 Print Head Nozzle, Remove Ink Cartridge: étape 3, image 3 de 3
    • Allow the printer to position the ink cartridge carrier into the ink cartridge removal location.

    • Before replacing the ink cartridge ensure the correct ink cartridge is installed.

    • Push down on the front edge of the ink cartridge.

    • Observe the angle at which the ink cartridge is removed.

    • Grasp ink cartridge and pull up and out to remove.

  4. How to Clean Canon PIXMA MP190 Print Head Nozzle, Clean Ink Nozzle: étape 4, image 1 de 3 How to Clean Canon PIXMA MP190 Print Head Nozzle, Clean Ink Nozzle: étape 4, image 2 de 3 How to Clean Canon PIXMA MP190 Print Head Nozzle, Clean Ink Nozzle: étape 4, image 3 de 3
    • Hold the ink cartridge with the ink nozzle facing up. Using a paper towel firmly wipe the entire ink nozzle.

    • Repeat until the nozzle appears free of any ink and debris.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Garret Wescott

Membre depuis le 10/23/14

597 Réputation

4 tutoriels rédigés

Équipe

Michigan Tech, Team 1-5, Lauer Fall 2014 Membre de l'équipe Michigan Tech, Team 1-5, Lauer Fall 2014

MTU-LAUER-F14S1G5

3 membres

5 tutoriels rédigés

Un commentaire

is ther an easy way to gain access to the roller at the rear of the machine to clean it

hope342 - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 9

30 derniers jours : 42

Total : 5,440