Réparez vos affaires Communauté Boutique

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

How to Disconnect an iPad Battery with a Playing Card

Introduction

Follow this guide to disconnect the battery in an iPad with a playing card.

If you're having trouble fitting a battery blocker underneath the battery connector on an iPad's logic board, you can try using a playing card to disconnect the battery instead. This procedure requires cutting a playing card to size.

Ce dont vous avez besoin

  1. How to Disconnect an iPad Battery with a Playing Card, Mark the screw slot and total width: étape 1, image 1 de 2 How to Disconnect an iPad Battery with a Playing Card, Mark the screw slot and total width: étape 1, image 2 de 2

    • Line up the left edge of a playing card with the left edge of the battery connector.

    • Use a pen to mark both sides of the screw hole and the end of the battery connector as shown.

    Traduire

  2. How to Disconnect an iPad Battery with a Playing Card, Mark the depth of the screw slot: étape 2, image 1 de 2 How to Disconnect an iPad Battery with a Playing Card, Mark the depth of the screw slot: étape 2, image 2 de 2

    • Line up the top edge of the card with the top edge of the screw hole.

    • Use a pen to mark the bottom edge of the battery connector.

    • These markings will aid in cutting a slot in the card to clear the screw hole.

    Traduire

  4. How to Disconnect an iPad Battery with a Playing Card, Cut the playing card to size: étape 3, image 1 de 2 How to Disconnect an iPad Battery with a Playing Card, Cut the playing card to size: étape 3, image 2 de 2

    • The length of the battery blocker is not important, but we recommend it to be about an inch, or the length from the tip of your thumb to its knuckle.

    • Use a pair of scissors to cut out the playing card battery blocker as shown.

    Traduire

  5. How to Disconnect an iPad Battery with a Playing Card, Disconnect the battery: étape 4, image 1 de 3 How to Disconnect an iPad Battery with a Playing Card, Disconnect the battery: étape 4, image 2 de 3 How to Disconnect an iPad Battery with a Playing Card, Disconnect the battery: étape 4, image 3 de 3

    • Be extremely slow and careful when you isolate the battery using a battery blocker. The battery contacts are easily bent or broken, resulting in irreversible damage.

    • Insert the battery blocker at a 35 degree angle to disconnect the battery.

    • The playing card ideally should slide under the logic board without encountering any blockages. After insertion, it should rest at a 15 degree angle.

    • Leave the battery blocker in place as you work.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

8 autres ont terminé cette réparation.

Auteur

avec 1 autre contributeur

Robert Boyd

Membre depuis le 02/01/21

26 479 Réputation

94 tutoriels rédigés

Badges: 19

+ 16 badges supplémentaires

Un commentaire

Thanks Robert. Great easy to create tool and excellent explanation.

Kevin Stark - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 7

7 derniers jours : 56

30 derniers jours : 256

Total : 9,166