Introduction

Use this guide to repair the power supply with a Phillips head screwdriver, a wrench, and pliers. These tools will help secure the screw holding the wire.

  1. First, to remove the plastic bracket, turn toaster oven on its side.
    • First, to remove the plastic bracket, turn toaster oven on its side.

  2. Use Phillips head screwdriver and wrench to remove screw and nut securing the plastic bracket.
    • Use Phillips head screwdriver and wrench to remove screw and nut securing the plastic bracket.

    • Use Phillips head screwdriver and pliers to remove screw and nut securing transformer.

    • If the wire gets pulled out of the transformer, reinsert it.

    • Use a small flathead screwdriver to secure the screw that holds the wire in place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tony Wang

Membre depuis le 05/10/2012

64 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 6-35, Regan Fall 2012 Membre de l'équipe Cal Poly, Team 6-35, Regan Fall 2012

CPSU-REGAN-F12S6G35

4 membres

6 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 11

Total : 701