Introduction
A walk-through of the steps needed to solve the error 20 on a canon t2i.
-
-
Check to make sure there is nothing physically preventing the shutter from opening.
-
-
-
-
Remove the memory card and wait 30 seconds.
-
Put the memory card back in.
-
-
-
If a shutter can be found to be purchased individually, replace the Shutter.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.
Équipe
UMass Dartmouth, Team 1-4, Duarte Fall 2014 Membre de l'équipe UMass Dartmouth, Team 1-4, Duarte Fall 2014
UMASSD-DUARTE-F14S1G4
3 membres
4 tutoriels rédigés
